Lay Out Your System

Using 1/2" Poly as the Main line and installing DRIPPERS with a
25 PSI Pressure Regulator & Filter at the beginning Water Source

Run up to 500ft of our 1/2" Poly Tubing installing up to 500 of the .5 gph PC Drippers; 

Run up to 500ft of our 1/2" Poly Tubing installing up to 250 of the 1gph PC Drippers

Run up to 250ft of our 1/2" Poly Tubing installing using up to 125 of the 2 gph PC Drippers,

Run up to 300ft of our 1/2" Poly Tubing installing up to 30 of the Adjustable Drippers or
Adjustable Dripper Stakes wide open max 10gph with a small stream spray at 25 PSI at the Faucet

Run up to 250ft of our 1/2" Poly Tubing installing up to 100 of the Adjustable Drippers or
Adjustable Dripper Stakes with the tops open to only use up to 2gph with water dripping
at 25 PSI at the Faucet



Maximum operating pressure for Drippers: 25 PSI
Minimum operating pressure for Drippers: 5 PSI
Minimum operating pressure for Adjustable Drippers: 5 PSI for Dripping and 15 PSI for Spraying 8 Streams

Using 1/4" Vinyl as the Main line and installing DRIPPERS with a
25 PSI Pressure Regulator & Filter at the beginning Water Source

Run up to 100ft of our 1/4" Vinyl Tubing installing up to 25 of the .5 gph PC Drippers (MLD-.5PC)

Run up to 100ft of our 1/4" Vinyl Tubing installing up to 18 of the 1 gph PC Drippers (MLD-1PC) 

Run up to 100ft of our 1/4" Vinyl Tubing installing up to 10 of the 2 gph PC Drippers (MLD-2PC)

Run up to 30ft of our 1/4" Vinyl Tubing installing up to 8 of the Adjustable Drippers (MLD-ADB) or
Adjustable Dripper Stakes (MLD-STA) set to DRIP ONLY ( Only 3 can be used if set to wide open
and maximum Clicks using 10 gph and small circle sprays)


********************************************************************************

Patio Kit:
Run up to 30ft of our 1/4" Vinyl Tubing installing up to ONLY 3 of the Adjustable Dripper Stakes
set to wide open & maximum clicks using 10gph and small circle sprays

Run up to 30ft of our 1/4" Vinyl Tubing installing up to 8 of the Adjustable Dripper Stakes
set to DRIP ONLY


Maximum operating pressure for Drippers: 25 PSI
Minimum operating pressure for Drippers: 5 PSI
Minimum operating pressure for Adjustable Drippers: 5 PSI for Dripping and 15 PSI for Spraying 8 Streams

Using 1/2" Poly as the Main line and installing In-Line Drip Tubing with
a 25 PSI Pressure Regulator & Filter at the beginning Water Source

Run up to a 30ft lead in of our 1/2" Poly Tubing and then connecting up to 240ft of our
1/2" In-Line Drip Tubing(MLD-HDT100) that has a built in 1gph PC Dripper every 12 inches.

Run up to 300ft of our 1/2" Poly Tubing and connecting up to 12 individual 33ft runs of our
1/4"In-Line Drip Tubing (MLD-QDT100) that has a built in .5 gph Dripper every 12 inches.
You can have up to a 15ft. Lead-in of our 1/4" Vinyl tubing between the 1/2" Poly
and the 1/4" In line Drip Tubing.



Using 1/2" Poly as the Main line and installing In-Line DRIPPERS with
a 25 PSI Pressure Regulator & Filter at the beginning Water Source

Run up to 300ft of our 1/2" Poly tubing and connecting up to 13 individual 30ft runs of our
1/4" Vinyl Tubing and installing every 12" up to 30 of our .5gph Add-A-Drippers (MLD-AAD)
per individual run.



Maximum operating pressure for In-Line Drip Tubing: 25 PSI
Minimum operating pressure for In-Line Drip Tubing: 5 to 7 PSI

Using 1/2" Poly as the Main line and installing MICRO SPRAYS
with a 50 PSI Pressure Regulator at the beginning Water Source

Run up to 300ft of our 1/2" Poly Tubing installing up to 50 of our Micro Spray Stake
Assemblies (MLS-211, MLS-BLA or MLS-TAN) off one faucet.

Attach up to 6 of our Micro Spray Kits per single faucet. Kit part #'s :
MLK-81, MLK-82T, MLK-LGH or 1 MLK-LGH + 5 MLK-LADD



Using 1/2" Poly as the Main line and installing MICRO SPRAYS
with a 25 PSI Pressure Regulator at the beginning Water Source
"Because you want to run a few Drippers on the same Line"

Run up to 300ft of our 1/2" Poly Tubing installing up to 30 of our Micro Spray Stake
Assemblies (MLS-211, MLS-BLA or MLS-TAN) & less than 10 Drippers off one faucet.
(If you want to run more than 10 Drippers and have 30 Micro Sprays Stake Assemblies installed then replace each
10 gph Micro Spray Stake Assembly with eiher 5 x 2gph Drippers or 10 x 1gph Drippers or 20 x .5gph Drippers)

Attach up to 6 of our Micro Spray Kits per single faucet. Kit part #'s MLK-81 & MLK-82

Attach up to 5 of our Micro Spray Kits per single faucet with these Kit part #'s:
5 MLK-LGH or 1 MLK-LGH + 3 MLK-LADD


Maximum operating pressure for Micro Stake Assemblies: 50 PSI
Minimum operating pressure for Micro Stake Assemblies: 15 PSI

1. Draw a layout of the landscape or garden area you want to water.
2. Calculate the distance from the faucet to the ends of the landscape areas and a total amount of material
3. With Micro Sprays placed every 6 to 8ft apart
4. with Drippers place one per plant.
5. Make a parts list to purchase online at www.misterlandscaper.com
6. Or send in a layout of your landscape areas to be watered showing where all the faucet hook-ups are located along with what city, state and your soil-type if you know it- to sales@misterlandscaper.com or fax it to 800-441-6294. (Please give the scale used feet per graph square or list distances on layout.)

Download Graph Paper

1. Draw a layout of the landscape or garden area you want to water.
2. Calculate the distance from the faucet to the ends of the landscape areas and a total amount of material